1-1/4" Hefty Twin Peaks Handlebar Feature 1-1/4" diameter in the clamping area
Work with the OEM riser clamps; have the correct wire exit location
Bars include control clamps to replace the oversize OEM clamps
Do not need to remove the stock pin in the OEM mount clamps; bars still have more than 35 degrees of adjustment
Knurled clamping area
Will work with hydraulic clutches
Made in the U.S.A.
Requires replacing the OEM handlebar control clamp halves with early-style versions, such as PART #s 0615-0273 or 0615-0274