570C CHAIN DRIVE CAMS Camshaft gear drive kits increase valve timing accuracy by eliminating timing chain lash and loosely-fit stock chain drive
Reverses the rear cam's direction of rotation, providing additional operating clearance between cam lobes; as a result, higher cam lifts are possible with the gear drive kit
Kits include cams, inner gears, outer drive gears, inner and outer bearings, gasket and instructions
Material must be removed from the inner surface of the stock gear cover to install S&S gear drive cams
A hydraulic press and other professional-level tools are required to install these kits
S&S recommends that adjustable pushrod/cover kit PART #0928-0017 be used
Cam bearings and gaskets must be replaced when installing new cams
Cams are also available with inner gears only; intended for cam replacement for motors that have already been converted to an S&S gear-drive system
Made in the U.S.A.
Cams for 06 Dyna and 07-16 Twin Cam are for use with models with hydraulic tensioner chain-drive system; require high-lift valve springs
Made in the U.S.A.
For 88/95/96/103 cubic-inch engines with compression ratios between 9:1 and 10:1
99-04 models require high-lift springs
GEAR DRIVE CAM KITS
Kits require high-performance valve springs when installed in 99-04 models.
Installer must check coil bind, valve-to-valve clearance and valve-to-piston clearance.
Due to the inherent characteristics of gear drives, you may experience more valve train noise.
CHAIN DRIVE CAM KITS
Installer must check coil bind, valve-to-valve clearance and valve-to-piston clearance.
NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES.
Strongest from 3,200-5,700 rpm
Please select an item to see specifications.
-
Shop More from:
-
Shop More in:
-
Shop similar from:
-
Shop similar to: